2005-01-CMM install

Click to see 01 hanging forward CMM from straps.JPG
Hanging forward Central Mounting
Module from straps.
 Click to see 02 leveling CMM.jpg
Leveling CMM.
 Click to see 03 one strap per corner.JPG
One strap per corner lets me
level it in two dimensions.
Click to see 04 hung and ready.JPG
Ready for glue.
Click to see 05 puttying gaps.JPG
Puttying in the gaps.
 Click to see 06 glued in.jpg
Glued in.
 Click to see 07 inside.JPG
View from inside.
 Click to see 08 end panel fitted.jpg
Fitting the end panel.
Click to see 09 workshop.JPG
The new garage.
 Click to see 10 taping to bulkhead.JPG
Taping CMM to bulkhead.
 Click to see 11 gluing backing strips.jpg
Gluing backing strips.
 Click to see 12 vac bag external.jpg
Vacuum bagging outside
laminates.
Click to see 13 end panel.jpg
Inside ends.
 Click to see 14 passageway.jpg
Cut out passageway forward.
 Click to see 15 final glass outside.jpg
Last layer on outside.
 Click to see 16 port end panel.jpg
Port end panel.
Click to see 17 db bulkhead in place.jpg
Daggerboard bulkhead.
 Click to see 18 end panel from bow.jpg
Starboard end panel
(viewed from v-berth).
 Click to see 19 why I save string.JPG
Reusing old model railroad
parts.
 Click to see 20 aft CMM.JPG
Aft CMM.
Click to see 21 hanging from 2x6s.JPG
Hanging from 2x6s.
 Click to see 22 leveling.JPG
Leveling the CMM.
 Click to see 23 end view.JPG
End view.
 Click to see 24 taped in place.JPG
Taped into place.